Resetting to Factory Default Settings

If the device no longer functions as expected, you can choose to reset the device to its factory default settings.

Use the firmware revert button to reset the device. The firmware revert button is shown in the following diagram:

Figure 2: The firmware revert button on the rear of the camera

  1. Disconnect power from the device.
  2. Using a straightened paperclip or similar tool, gently press and hold the firmware revert button.
  3. While continuing to hold the button, power the device.

    Release the button after three seconds.

CAUTION — Do not apply excessive force. Inserting the tool too far may damage the camera.