Cover View

  1. Dome cover

    Vandal resistant dome cover.

  2. Tamper resistant screws

    Star-shaped captive screws to fix the dome cover to the base.

Bottom View

  1. Cable entry hole

    An entry hole for the cables required for camera operation.

  2. 1-1/2” NPT thread mount

    Standard female 1-1/2” NPT thread mount for mounting the dome camera to a pole or bracket.

Front View

  1. Azimuth control

    Provides control of the image angle.

  2. Tilt lock thumb screw

    Provides a locking mechanism for the image tilt adjustment.

  3. Pan lock thumb screw

    Provides a locking mechanism for the image pan adjustment.

  4. I/O connector block

    Provides connections to external input/output devices.

  5. Audio/video connector

    Accepts a mini-jack connector (3.5 mm).

  6. Power connector block

    Accepts a terminal block with either an AC or DC power connection. DC input can be either polarity. Only required when Power over Ethernet is not available.

  7. Ethernet port

    Accepts an Ethernet connection to a network. Server communication and image data transmission occurs over this connection. Also receives power when it is connected to a network that provides Power over Ethernet.

  8. Connection status LED indicator

    Provides information about device operation. For more information, see Connection Status LED Indicator.

  9. Link LED indicator

    Indicates if there is an active connection in the Ethernet port.

Rear View

  1. SD card slot

    Accepts an SD card for onboard storage.