Overview
Front View
-
Configuration ethernet port
A secondary Ethernet port for configuring the camera. Does not accept PoE.
-
Link LED indicator
Indicates if there is an active connection in the Ethernet port.
-
Connection status LED indicator
Provides information about device operation. For more information, see Connection Status LED Indicator.
-
SD card slot
Accepts an SD card for onboard storage.
-
Serial number tag
Device information, product serial number and part number label.
Side View
-
Ethernet port
Accepts an Ethernet connection to a network. Server communication and image data transmission occurs over this connection. Also receives power when it is connected to a network that provides Power over Ethernet.
-
Power connector block
Accepts a terminal block with either an AC or DC power connection. DC input can be either polarity. Only required when Power over Ethernet is not available.
-
Audio I/O connector
Accepts a mini-jack connector (3.5 mm).
-
I/O connector block
Provides connections to external input/output devices.
- Cover release tab
Allows you to release and remove the dome cover.
- Clamps
Spring loaded locking mechanisms that secure the camera to the mounting surface.
- Lanyard anchor
Safety lanyards can attach to anchors at the top of each clamp to help prevent the camera from falling.