Base View

  1. Mounting holes

    Mounting points for the camera.

  2. I/O connector block

    Provides connections to external input/output devices.

  3. Cable retaining eyelet

    Small tab to hold wrapped cables in place.

  4. Cable entry hole

    An entry hole for the cables required for camera operation.

  5. Power connector block

    Accepts a terminal block with either an AC or DC power connection. DC input can be either polarity. Only required when Power over Ethernet is not available.

  6. Audio I/O connector

    Accepts a mini-jack connector (3.5 mm).

  7. Ethernet port

    Accepts an Ethernet connection to a network. Server communication and image data transmission occurs over this connection. Also receives power when it is connected to a network that provides Power over Ethernet.

  8. Lanyard

    Connects to the anchor on the main camera module to help prevent the camera from falling after installation.

Camera View

  1. Serial number tag

    Device information, product serial number and part number label.

  2. Configuration ethernet port

    A secondary Ethernet port for configuring the camera. Does not accept PoE.

  3. Link LED indicator

    Indicates if there is an active connection in the Ethernet port.

  4. Connection status LED indicator

    Provides information about device operation. For more information, see Connection Status LED Indicator.

  5. SD card slot

    Accepts an SD card for onboard storage.