Accessing the Camera Web Interface

After the camera or encoder has been installed, you need the device’s IP address to access the web interface. The IP address can be found in one of the following places:

• Avigilon Control Center™ Client software: open the device Setup tab to see the details of the selected camera or encoder.
• Avigilon Camera Installation Tool: click the Connect to Camera button to see the details of the connected camera or encoder.

Once you have the IP address, complete the following procedure to access the web interface:

Note: The web browser must be configured to accept cookies or the camera web interface will not function correctly.

1. On a computer with internet access, enter the device’s IP address into a web browser:

   http://<camera IP address>/

   For example: http://192.168.1.40/

2. You will automatically be prompted to enter your username and password to access the device.

   The default username is admin, and the default password is admin. It is recommended that you change the default password after your first login. For more information, see Editing Users and Passwords.

Note: You can only change the device password in the web interface. The password cannot be changed in the network video management software.