Setup

Note: Certain options are not displayed if they are not supported by the camera model you are using or if you do not have the required user permissions.

The factory default settings allow you to use the camera or encoder immediately after installation. If you have special requirements, you can customize the settings through the web interface. In the top-left menu area, click Setup to display all the available setup pages.

A Restore Defaults button is available on each setup page to restore the factory default settings.

Be aware that some settings are only available through the camera's web interface and cannot be changed in the network video management software.

For information specific to the HD Multisensor Dome Cameras, see HD Multisensor Dome Camera.

For the settings that are specific to PTZ cameras, see PTZ Camera.

For the settings that are specific to encoders, see Encoder.