Overview

Cover View

  1. Dome cover

    Vandal resistant dome cover.

  2. Tamper resistant screws

    Star-shaped captive screws to fix the dome cover to the base.

  3. Side cable entry cover

    Covers the side cable entry hole.

Top View

  1. Wall plate mounting screws

    Screws for mounting the camera to the wall plate.

  2. Lanyard

    Connects to a lanyard hook on the cover.

  3. Bottom cable entry hole

    A bottom entry hole for the cables required for camera operation.

  4. Side cable entry hole

    A side entry hole for the cables required for camera operation.

Wall Plate View

  1. Camera mounts

    Points for mounting the camera body to the wall plate.

  2. Cable entry hole

    An entry hole for the cables required for camera operation.

  3. Mounting holes

    Holes for mounting the wall plate to the following:

    1. UK standard single gang box
    2. Octagon gang box
    3. 4" gang box
    4. Mounting surface
    5. US standard single gang box

Front View

  1. Power connector block

    Accepts a terminal block with either an AC or DC power connection. DC input can be either polarity. Only required when Power over Ethernet is not available.

  2. Link LED indicator

    Indicates if there is an active connection in the Ethernet port.

  3. Ethernet port

    Accepts an Ethernet connection to a network. Server communication and image data transmission occurs over this connection. Also receives power when it is connected to a network that provides Power over Ethernet.

  4. Connection status LED indicator

    Provides information about device operation. For more information, see Connection Status LED Indicator.

  5. Serial number tag

    Device information, product serial number and part number label.

  6. Audio/video connector

    Accepts a mini-jack connector (3.5 mm).

Rear View

  1. Azimuth control

    Provides control of the image angle.

  2. SD card slot

    Accepts an SD card for onboard storage.

    Not available on H4 Edge Solution (ES) Cameras.

  3. Micro USB port

    Accepts a micro USB to USB adapter. Only required when using the Avigilon USB Wi-Fi Adapter.

  4. I/O connector block

    Provides connections to external input/output devices.

  5. Tilt lock thumb screw

    6. Provides a locking mechanism for the image tilt adjustment.

  6. Pan lock thumb screw

    Provides a locking mechanism for the image pan adjustment.

IR View

  • IR Illuminator Ring

    Provides scene illumination in the IR spectrum. The IR illuminator ring is not included with all models.