Overview
Cover View
-
Tamper resistant screws
Star-shaped captive screws to fix the dome cover to the base.
-
Dome cover
Vandal resistant dome cover.
Bottom View
-
Camera alignment latch
A latch for locking the camera into the pendant wall mount or the pendant NPT mount.
-
Camera lanyard hook
A hook for suspending the camera from the lanyard provided in the pendant wall mount or the pendant NPT mount.
-
Cable entry hole
An entry hole for the cables required for camera operation.
Top View
-
Camera mounting screws
Screws for securing the camera to the pendant wall mount or the pendant NPT mount.
-
Lanyard
Connects to a lanyard hook on the cover.
Front View
-
Power connector block
Accepts a terminal block with either an AC or DC power connection. DC input can be either polarity. Only required when Power over Ethernet is not available.
-
Link LED indicator
Indicates if there is an active connection in the Ethernet port.
-
Ethernet port
Accepts an Ethernet connection to a network. Server communication and image data transmission occurs over this connection. Also receives power when it is connected to a network that provides Power over Ethernet.
-
Connection status LED indicator
Provides information about device operation. For more information, see Connection Status LED Indicator.
-
Serial number tag
Device information, product serial number and part number label.
-
Audio/video connector
Accepts a mini-jack connector (3.5 mm).
Rear View
-
Azimuth control
Provides control of the image angle.
-
SD card slot
Accepts an SD card for onboard storage.
Not available on H4 Edge Solution (ES) Cameras.
-
Micro USB port
Accepts a micro USB to USB adapter. Only required when using the Avigilon USB Wi-Fi Adapter.
-
I/O connector block
Provides connections to external input/output devices.
- Tilt lock thumb screw
-
Pan lock thumb screw
Provides a locking mechanism for the image pan adjustment.
Provides a locking mechanism for the image tilt adjustment.
IR View
Provides scene illumination in the IR spectrum. The IR illuminator ring is not included with all models.
Pendant Wall Mount Bracket View
-
Bracket mounting holes
Points for mounting the pendant wall mount bracket to a mounting surface.
-
Mounting tabs
Tabs for placing the pendant wall mount onto the bracket.
-
Mounting points
Points for securing the pendant wall mount to the mounting bracket.
Pendant Wall Mount View
- Pendant wall mount
Dome camera mount for walls and other mounting surfaces.
- Pendant wall mount screws
Screws for securing the pendant wall mount to the mounting bracket.
- NPT pipe entry hole
A 3/4” NPT threaded hole for NPT pipe conduits.
Pendant NPT Mount View
Note: The NPT pipe, adapter, and lock nut are not supplied by Avigilon and should be sourced separately.
-
1-1/2” NPT-female to NPT-female adapter
An adapter for attaching the pendant NPT mount to an NPT pipe.
-
Pendant NPT mount
Dome camera mount for NPT pipes.
-
Lock nut
Lock nut for securing the pendant NPT mount on the NPT-female to NPT-female adapter.
- NPT pipe
NPT pipe used for a pendant mount with the NPT adapter.