Overview
Rear View
-
Link LED indicator
Amber LED indicates if there is an active connection in the Ethernet port.
-
Connection status LED indicator
Green LED provides information about device operation. For more information, see Connection Status LED Indicator.
-
microSD card slot
Accepts a microSD card for onboard storage. For more information, see (Optional) Configuring microSD Card Storage.
- microSD cover
Protective cover for the microSD card slot. Uses tamper resistant screws to secure the cover.
- Sprayer mounting location
(Available on -WP models only.) An optional washer can be mounted at this location for cleaning the lens and IR window . Connect digital output 1 from the camera to the washer pump. This will allow the camera WebUI or Avigilon Control Center to activate the washer whenever a washing sequence is initiated. For more information, please refer to the Camera WebUI guide. The washer and cleaning liquid are sold separately.
Install the sprayer mounting bracket by tightening the provided screws into this location.
Front View
- Lens
The camera lens is housed behind a protective window.
- Wiper
(Available on -WP models only) Wiper rotates 90° in both directions to clean both lens and IR window.
- Variable IR Illuminators
High powered infrared LEDs with variable field of view to accommodate different low light situations.
The IR illuminators are housed behind a protective window.
Top View
- Lanyard anchor
The safety lanyard attaches to the anchor to prevent the camera from falling during installation.
-
Ethernet port
Accepts an Ethernet connection to a network. Server communication and image data transmission occurs over this connection. Also receives power when it is connected to a network that provides Power over Ethernet.
-
Power and I/O cables
Cables for connecting the camera to auxiliary power and I/O devices. For more information, see Connecting to Power and External Devices.
Pendant Wall Mount View
- Pendant wall mount
Camera mount for walls and other mounting surfaces.
-
Lanyard
Connects to the lanyard anchor on the camera base.
- Tamper resistant screws
- NPT pipe entry hole
A 3/4” NPT threaded hole for NPT pipe conduits.
Star captive screws to fix the dome camera to the mounting adapter.
NPT Mount View
-
1-1/2” NPT-female to NPT-female adapter
An adapter for attaching the pendant NPT mount to an NPT pipe.
Note: The adapter is not an included accessory supplied by Avigilon and should be sourced separately.
-
Lock nut
Locking nut for securing the pendant NPT mount on the NPT-female to NPT-female adapter.
-
Pendant NPT mount
Dome camera mount for NPT pipes.
-
Lanyard
Connects to the lanyard anchor on the camera base.
- Tamper resistant screws
Star captive screws to fix the dome camera to the mounting adapter.